Expanding applications of SERS through versatile nanomaterials engineering.

Surface-enhanced Raman scattering (SERS) spectroscopy has evolved into a cross-disciplinary analytical technique by unveiling relevant chemical, biological, material, and structural information. The focus of this review is on two critical properties for successfully expanding applications of SERS spectroscopy: quality of the plasmonic substrate and molecule localization to the substrate. In this review, we discuss recent work on quantifying SERS distance dependence, key factors for substrate characterization and performance evaluation, expansion of SERS applications through substrate development for UV plasmonics and short-distance capture strategies for optimizing analyte-surface structures. After surveying the recent developments of these seemingly disparate fields, we suggest new research directions that may originate from a synergistic blend of all the herein discussed topics. Finally, we discuss major challenges and open questions related to the application of SERS for understanding of chemical processes at the nanoscale, with special interest on in situ catalysts and biosensing.

Aluminum Film-Over-Nanosphere Substrates for Deep-UV Surface-Enhanced Resonance Raman Spectroscopy.

We report here the first fabrication of aluminum film-over nanosphere (AlFON) substrates for UV surface-enhanced resonance Raman scattering (UVSERRS) at the deepest UV wavelength used to date (λex = 229 nm). We characterize the AlFONs fabricated with two different support microsphere sizes using localized surface plasmon resonance spectroscopy, electron microscopy, SERRS of adenine, tris(bipyridine)ruthenium(II), and trans-1,2-bis(4-pyridyl)-ethylene, SERS of 6-mercapto-1-hexanol (as a nonresonant molecule), and dielectric function analysis. We find that AlFONs fabricated with the 210 nm microspheres generate an enhancement factor of approximately 104-5, which combined with resonance enhancement of the adsorbates provides enhancement factors greater than 106. These experimental results are supported by theoretical analysis of the dielectric function. Hence our results demonstrate the advantages of using AlFON substrates for deep UVSERRS enhancement and contribute to broadening the SERS application range with tunable and affordable substrates.

Investigating Nanoscale Electrochemistry with Surface- and Tip-Enhanced Raman Spectroscopy.

The chemical sensitivity of surface-enhanced Raman spectroscopy (SERS) methodologies allows for the investigation of heterogeneous chemical reactions with high sensitivity. Specifically, SERS methodologies are well-suited to study electron transfer (ET) reactions, which lie at the heart of numerous fundamental processes: electrocatalysis, solar energy conversion, energy storage in batteries, and biological events such as photosynthesis. Heterogeneous ET reactions are commonly monitored by electrochemical methods such as cyclic voltammetry, observing billions of electrochemical events per second. Since the first proof of detecting single molecules by redox cycling, there has been growing interest in examining electrochemistry at the nanoscale and single-molecule levels. Doing so unravels details that would otherwise be obscured by an ensemble experiment. The use of optical spectroscopies, such as SERS, to elucidate nanoscale electrochemical behavior is an attractive alternative to traditional approaches such as scanning electrochemical microscopy (SECM). While techniques such as single-molecule fluorescence or electrogenerated chemiluminescence have been used to optically monitor electrochemical events, SERS methodologies, in particular, have shown great promise for exploring electrochemistry at the nanoscale. SERS is ideally suited to study nanoscale electrochemistry because the Raman-enhancing metallic, nanoscale substrate duly serves as the working electrode material. Moreover, SERS has the ability to directly probe single molecules without redox cycling and can achieve nanoscale spatial resolution in combination with super-resolution or scanning probe microscopies. This Account summarizes the latest progress from the Van Duyne and Willets groups toward understanding nanoelectrochemistry using Raman spectroscopic methodologies. The first half of this Account highlights three techniques that have been recently used to probe few- or single-molecule electrochemical events: single-molecule SERS (SMSERS), superlocalization SERS imaging, and tip-enhanced Raman spectroscopy (TERS). While all of the studies we discuss probe model redox dye systems, the experiments described herein push the study of nanoscale electrochemistry toward the fundamental limit, in terms of both chemical sensitivity and spatial resolution. The second half of this Account discusses current experimental strategies for studying nanoelectrochemistry with SERS techniques, which includes relevant electrochemically and optically active molecules, substrates, and substrate functionalization methods. In particular, we highlight the wide variety of SERS-active substrates and optically active molecules that can be implemented for EC-SERS, as well as the need to carefully characterize both the electrochemistry and resultant EC-SERS response of each new redox-active molecule studied. Finally, we conclude this Account with our perspective on the future directions of studying nanoscale electrochemistry with SERS/TERS, which includes the integration of SECM with TERS and the use of theoretical methods to further describe the fundamental intricacies of single-molecule, single-site electrochemistry at the nanoscale.

Surface-Enhanced Raman Spectroscopy Biosensing: In Vivo Diagnostics and Multimodal Imaging.

This perspective presents recent developments in the application of surface-enhanced Raman spectroscopy (SERS) to biosensing, with a focus on in vivo diagnostics. We describe the concepts and methodologies developed to date and the target analytes that can be detected. We also discuss how SERS has evolved from a "point-and-shoot" stand-alone technique in an analytical chemistry laboratory to an integrated quantitative analytical tool for multimodal imaging diagnostics. Finally, we offer a guide to the future of SERS in the context of clinical diagnostics.

Ultrafast and nonlinear surface-enhanced Raman spectroscopy.

Ultrafast surface-enhanced Raman spectroscopy (SERS) has the potential to study molecular dynamics near plasmonic surfaces to better understand plasmon-mediated chemical reactions such as plasmonically-enhanced photocatalytic or photovoltaic processes. This review discusses the combination of ultrafast Raman spectroscopic techniques with plasmonic substrates for high temporal resolution, high sensitivity, and high spatial resolution vibrational spectroscopy. First, we introduce background information relevant to ultrafast SERS: the mechanisms of surface enhancement in Raman scattering, the characterization of plasmonic materials with ultrafast techniques, and early complementary techniques to study molecule-plasmon interactions. We then discuss recent advances in surface-enhanced Raman spectroscopies with ultrafast pulses with a focus on the study of molecule-plasmon coupling and molecular dynamics with high sensitivity. We also highlight the challenges faced by this field by the potential damage caused by concentrated, highly energetic pulsed fields in plasmonic hotspots, and finally the potential for future ultrafast SERS studies.

Hetero-oligomer nanoparticle arrays for plasmon-enhanced hydrogen sensing.

This paper describes how the ability to tune each nanoparticle in a plasmonic hetero-oligomer can optimize architectures for plasmon-enhanced applications. We demonstrate how a large-area nanofabrication approach, reconstructable mask lithography (RML), can achieve independent control over the size, position, and material of up to four nanoparticles within a subwavelength unit. We show how arrays of plasmonic hetero-oligomers consisting of strong plasmonic materials (Au) and reactant-specific elements (Pd) provide a unique platform for enhanced hydrogen gas sensing. Using finite-difference time-domain simulations, we modeled different configurations of Au­Pd hetero-oligomers and compared their hydrogen gas sensing capabilities. In agreement with calculations, we found that Au­Pd nanoparticle dimers showed a red-shift and that Au­Pd trimers with touching Au and Pd nanoparticles showed a blue-shift upon exposure to both high and low concentrations of hydrogen gas. Both Au­Pd hetero-oligomer sensors displayed high sensitivity, fast response times, and excellent recovery.

Centrifugal shape sorting and optical response of polyhedral gold nanoparticles.

A centrifugal route for separating small {110}-faceted gold nanostructures, namely rhombic dodecahedra (RD) and triangular bipyramids (BPs), which form simultaneously during synthesis and cannot be separated by means of conventional filtration methods, is presented. The centrifuged solution shows two distinct bands: i) RD and ii) BPs, as verified in the corresponding scanning electron microscopy images. The sorted BPs show a refractive index dependence 2.5 times that of the as-synthesized, unsorted mixture.

Size-dependent surface plasmon resonance broadening in nonspherical nanoparticles: single gold nanorods.

The dependence of the spectral width of the longitudinal localized surface plasmon resonance (LSPR) of individual gold nanorods protected by a silica shell is investigated as a function of their size. Experiments were performed using the spatial modulation spectroscopy technique that permits determination of both the spectral characteristics of the LSPR of an individual nanoparticle and its morphology. The measured LSPR is shown to broaden with reduction of both the nanorod length and its diameter, which is in contrast with the predictions of existing classical and quantum theoretical models. This behavior can be reproduced assuming the LSPR width linearly depends on the inverse of an effective length proportional to the square root of the particle surface with the same slope as that recently determined for silica-coated silver nanospheres.

A quantitative study of the environmental effects on the optical response of gold nanorods.

The effects of the dielectric environment on the optical extinction spectra of gold nanorods were quantitatively studied using individual bare and silica-coated nanorods. The dispersion and amplitude of their extinction cross-section, dominated by absorption for the investigated sizes, were measured using spatial modulation spectroscopy (SMS). The experimental results were compared to calculations from a numerical model that included environmental features present in the measurements and the morphology and size of the corresponding nanorods measured by transmission electron microscopy. The combination of these experimental and theoretical tools permits a detailed interpretation of the optical properties of the individual nanorods. The measured optical extinction spectra and the extinction cross-section amplitudes were well reproduced by the numerical model for silica-coated gold nanorods, for which the silica shell provides a controlled environment. In contrast, additional environmental factors had to be assumed in the model for bare nanorods, stressing the importance of controlling and characterizing the experimental conditions when measuring the optical response of bare surface-deposited single metal nanoparticles.

Surface plasmon mapping of dumbbell-shaped gold nanorods: the effect of silver coating.

We report on the identification of surface plasmons in individual gold dumbbell-shaped nanoparticles (AuDBs), as well as AuDBs coated with silver. We use spatially resolved electron energy-loss spectroscopy in a scanning electron microscope, which allows us to map plasmon-energy and intensity spatial distributions. Two dominant plasmon resonances are experimentally resolved in both AuDBs and silver-coated AuDBs. The intensity of these features is peaked either at the tips or at the sides of the nanoparticles. We present boundary element method simulations in good agreement with the experiment, allowing us to elucidate the nature of such modes. While the lower-energy, tip-focused plasmon is of longitudinal character for all dumbbells under consideration, the second side-bound plasmon has a more involved symmetry, starting as a longitudinal quadrupole in homogeneous AuDBs and picking up transversal components when silver coating is added. The longitudinal dipolar mode energy is found to blue-shift upon coating with silver. We find that the substrate produces sizable shifts in the plasmons of silver-coated AuDBs. Our analysis portraits a complex plasmonic scenario in metal nanoparticles coated with silver, including a transition from the original homogeneous gold dumbbell plasmons to the modes of homogeneous silver rods. We believe that these findings can have potential application to plasmon engineering.

Acoustic Vibrations in Bimetallic Au@Pd Core-Shell Nanorods.

The acoustic vibrations of gold nanorods coated with palladium were investigated as a function of Pd amount using ultrafast pump-probe spectroscopy. Both the extensional and breathing vibrational modes of the nanorods were coherently excited and detected. This permits precise determination of their periods, which were found to decrease and increase with Pd deposition, for the extensional and vibrational modes, respectively. These opposite behaviors reflect changes of the nanoparticle size and mechanical properties, in agreement with numerical simulations. Comparison of experimental and computed periods yields information on the amount of deposited Pd, providing a novel tool to characterize bicomponent nano-objects for small fractions of one of the components (Pd/Au atomic fraction down to 5%).

Electronic nose screening of ethanol release during sol-gel encapsulation. A novel non-invasive method to test silica polymerisation.

Porous silica matrices prepared by sol-gel process yield biocompatible materials adequate for encapsulation of biomolecules or drugs. The procedure is simple and fast, but when alkoxyde precursors like tetraethoxysilane (TEOS) are used the polymerisation reaction leads to the formation of alcohol as a by-product, which can produce undesirable effects on the activity of entrapped enzymes or modify a drug release kinetic. Therefore, it is critical to determine that no remnant ethanol is left prior using or storing the obtained biomaterial. In this regard, the technique used in the alcohol determination should be non-invasive and non-destructive to preserve the encapsulation device intact and ready to use. In this work we have successfully used a portable electronic nose (e-nose) for the screening of silica polymerisation process during theophylline encapsulation. TEOS reaction was "smelt" since precursor pre-hydrolysis until the end of ethanol release, sensed directly at the headspace of matrices slabs. Measurements showed that ethanol was negligible since 10th day in polymeric slabs of 10 mm width and 2 cm diameter. This first use of e-nose following a polymerisation reaction opens a wide number of putative applications in pharmaceutical and biochemical fields.